Request about availability of your MMI updates

Audi Q3 MMI 3G Plus HN+R Firmware Update P1001

Firmware update HN+R_EU_AU_P1001 for compatible Audi Q3 vehicles equipped with MMI 3G Plus and the matching HN+R_EU_AU software branch. P1001 is the final European firmware release for this branch.

This product contains firmware only. Navigation maps and map activation are not included. Compatibility must be confirmed from the complete software version currently installed in the vehicle.

Check the firmware prefix before ordering

The installed software version must begin with HN+R_EU_AU_. HN+R_EU_AU_P1001 is a European firmware release, even though this product appears in the Middle East category. Do not install it on HN+_EU_AU3G, HNav, BNav, RMC, MIB2 or another firmware branch. Check the full version using our Audi MMI identification guide or use the Check Upgrade service.

Firmware available for Audi Q3 MMI 3G Plus HN+R

This category currently lists one single firmware update. It is intended for compatible MMI 3G Plus HN+R systems in selected Audi Q3 and RS Q3 vehicles. The category location does not change the product’s firmware region or compatibility requirements.

HN+R_EU_AU_P1001 firmware

P1001 is the final European firmware release for compatible MMI 3G Plus systems from the HN+R_EU_AU software branch. The product page identifies Audi Q3 and RS Q3 among the models that use this firmware family.

Enter your complete current MMI software version when ordering. Some older systems may need the intermediate firmware HN+R_EU_AU_K0942_4; the product page says it will be supplied if required.

Firmware only: navigation maps, map activation and CarPlay or Android Auto hardware are not included. Digital download or prepared SD card delivery is available, depending on the option selected.

View the Audi MMI 3G Plus HN+R P1001 firmware

Compatibility checklist

  • The installed MMI is MMI 3G Plus HN+R.
  • The complete current software version begins with HN+R_EU_AU_.
  • The vehicle is not running the separate HN+_EU_AU3G branch or another MMI family.
  • You understand that maps and map activation are not included with this firmware-only product.

Note about this category

Although this product is listed under Middle East, its product page identifies P1001 as European firmware for the HN+R_EU_AU branch. Confirm the software prefix and regional requirements before ordering; the Middle East category placement does not make this a Middle East firmware release.

Installation information

The firmware is installed from an SD card through the Red Engineering Menu. Follow the Audi MMI 3G firmware installation guide and the instructions supplied with the product. Keep the vehicle on a stable power supply and do not interrupt the update.

Vehicles equipped with BOSE or Bang & Olufsen may require additional care when selecting components. Read the product instructions before starting.

Frequently asked questions

Is P1001 Middle East firmware?

The product page identifies HN+R_EU_AU_P1001 as the final European firmware release for the HN+R_EU_AU branch. Verify that this branch is correct for your vehicle before ordering.

Will P1001 work with every Audi Q3?

No. It is for compatible Audi Q3 and RS Q3 vehicles equipped with MMI 3G Plus HN+R and the matching HN+R_EU_AU firmware branch. Confirm the complete installed software version first.

Are navigation maps included?

No. This product contains firmware only. Maps and map activation must be purchased separately or selected as part of a compatible bundle.

Does the firmware add Apple CarPlay or Android Auto?

No. MMI 3G Plus requires a separate external interface module to add Apple CarPlay or Android Auto.