Audi MMI 3G Video in Motion (VIM) - VCDS Coding Guide

Audi MMI 3G Video in Motion - What This Guide Covers
Video in Motion (VIM) is the commonly used name for changing the factory video playback restriction on supported Audi MMI 3G infotainment systems.
This guide documents the VCDS adaptation method used on compatible MMI 3G systems and includes the VIM Security Access login-code generator required by the procedure.
Before continuing, confirm that your Audi actually uses a compatible MMI 3G system. Similar-looking Audi infotainment systems can use completely different coding or may not support this adaptation at all.
You can identify your MMI here:
Important Safety Notice
Video content can distract the driver and may be restricted by traffic laws in your country or region.
This information is provided as a technical reference for compatible infotainment systems. Video playback should only be used where it is legal and where it cannot distract the driver — for example while the vehicle is parked or for passenger/rear-seat entertainment.
This mod will enable video when you drive the car. Please be awared! this feature is quite danger and not recommended to everyone.
Instructions
- Select control module 5F in VAG-COM/VCDS
- Select "Advanced ID - 1A"
- Submit the value from the "Serial number" field in this form (CLICK). If there's more than one serial number, use the first one!
- Select "Security Access - 16"
- Enter the personal login-code generated bellow.
- Press "Do It!". If you receive a "code not valid" message try the alternative code. If neither code works it's likely that your control module doesn't support VIM adaptation.
- Select "Adaptation - 10"
- Select channel 48
- Press read
- Set the value to 255
- Press test
- Press save
- Press "Done, Go Back", close the controller and quit the software
- Restart the MMI: Press and hold down the function keys 1 (SETUP), the control button 2 and the control key at the top right 3 simultaneously until the MMI system shuts down. Release keys -> MMI system reboots.
Audi MMI 3G VIM Login Code Generator
The VCDS procedure for supported MMI 3G systems requires a Security Access login derived from the MMI serial number.
Enter the serial number obtained from the Advanced Identification screen into the generator below. If two codes are generated, try the primary code first.
If neither generated code is accepted, stop and verify the MMI platform and compatibility rather than trying unrelated security codes.
Please let us know in comments if its working for You (please also add which audi model and mmi version).
Which Audi MMI Systems Does This Guide Apply To?
This guide is intended for compatible Audi MMI 3G systems.
Common MMI 3G software prefixes include:
BNav_
HNav_
HN+_
HN+R_
Do not assume that the same VCDS adaptation applies to:
RMC_
MHIG_
MHI2_
MHI2Q_
MHS2_
MH2p_
MHI3_
If your software version starts with one of these prefixes, use a procedure specifically written for that infotainment platform.
How to convert videos to play on MMI 3G Plus? Click here.
MMI 3G VIM code generator
Enter the serial number from the Advanced Identification screen and click “Generate”. Always start with Code 1.
Code 1:
Code 2:




15 comments
Hi guys, it worked perfectly with the first code, AUDI A5 2015 MMI3Gplus, I did it after updating MMI firmware and maps, many thanks for the turorial :) :) :)
where is that link for the video conversion settings for 3g mmi +
does this also work for when dvds are playing?
yes it should also working for DVDs
there it is: https://mmiupdates.com/tutorials/convert-videos-to-play-on-mmi-3g-high-plus/
Where do you get the VCDS cable to plug into car? Also where do you get the software for it?
on to the OBD2 port which is usually located under the dashboard, beneath the steering wheel column, you need to have VCDS cable not just standard OBD2 cable. You can get a VCDS cable & software from us https://mmiupdates.com/product/2020-new-arrival-vcds-hex-v2-interface-vagcom-20-4-1-vag-com/
240 yikes! There has to be a cheaper option for modifying VIM Can you put together a tutorial for charista? Far as I know, it's only $40
unfortunately we do not have carista at the moment but we will try to get one soon to make some tutorials with it.
Hello, is this procedure same for RMC and MHI2 systems? Thank you
Hej, haven't tested with RMC / MHI2 systems.
Mk7 GTI (64) Tried both unique codes and neither work also tried on S3 (8V) & MK7.5 GTI and didn’t work either any ideas ?
haven't tested on vw cars and audi mib units.. only on mmi 3g plus
Audi A4 B8 2009 Original MMI was a 2G high unit and had the MMI 3G PLUS retrofitted. Thank you for the tutorial! Worked instantly for me with the first generated code and everything went flawlessly, only thing is there was 1-2 minor steps missing out of the tutorial but with common sense you can easily tackle the odd…
Just did it. 2015 Audi q7. Much appreciated.
Sign in or create an account to leave a comment →