Audi MMI 3G Basic may be an older infotainment platform, but many Audi vehicles equipped with BNav are still in daily use.
For European MMI 3G Basic systems, navigation database version 5.36.1 with product number 4G0060884AN is the latest European map package currently available on MMIUpdates.com.
The most important details are:
Map version: 5.36.1
Product number: 4G0060884AN
Region: Europe / ECE
System: Audi MMI 3G Basic
Software family: BNav_
This map package is specifically intended for MMI 3G Basic.
It is not compatible with MMI 3G High, MMI 3G Plus, RMC, MIB1, MIB2 or MIB3 systems.
Before downloading or installing anything, check the complete software version installed in your vehicle.
If you are not sure which MMI system you have:
You can also use our compatibility checker:
MMI 3G Basic 5.36.1 – Quick Information
System:
Audi MMI 3G Basic / BNav
Navigation database:
5.36.1
Audi product number:
4G0060884AN
Region:
Europe
Firmware family:
BNav_EU_
Recommended firmware available for compatible European systems:
BNav_EU_K0260_1_D1
Firmware product number:
8R0906961DP
Maps only:
Complete firmware and maps bundle:
How to Check Whether You Have MMI 3G Basic
The safest way to identify MMI 3G Basic is by checking the software version displayed by the infotainment system.
Open Version Information and look at the complete software train.
A European MMI 3G Basic system normally uses a version beginning with:
BNav_EU_
For example:
BNav_EU_K0260_1_D1
The BNav_ prefix is the important part.
If your software begins with:
HNav_
HN+_
HN+R_
RMC_
MHIG_
MHI2_
MHI2Q_
MHS2_
MH2p_
MHI3_
do not use the MMI 3G Basic 5.36.1 package.
Those prefixes identify different infotainment platforms.
What Is 4G0060884AN?
4G0060884AN is the product number associated with the European MMI 3G Basic 5.36.1 navigation database.
If you are searching for:
4G0060884AN
5.36.1
MMI 3G Basic maps
BNav Europe maps
you are referring to the same MMI 3G Basic European navigation release covered by this guide.
The product number is particularly useful when comparing older map releases or checking which package has already been installed.
Is 5.36.1 the Latest MMI 3G Basic Europe Map Update?
5.36.1 is the latest European MMI 3G Basic navigation release currently offered for the BNav platform on MMIUpdates.com.
Older European releases included versions such as:
5.30.2
5.31.2
5.32.2
5.33.2
5.34.2
5.35.2
These older databases have now been superseded by 5.36.1 for compatible European MMI 3G Basic systems.
If your Audi still has one of these earlier map versions, there is normally no reason to deliberately install another intermediate map database when your system is compatible with 5.36.1.
Firmware requirements, however, should be checked separately.
Map Version and Firmware Version Are Not the Same Thing
This is one of the most common points of confusion with Audi MMI updates.
5.36.1 is a navigation map database version.
BNav_EU_K0260_1_D1 is a firmware version.
They perform completely different functions.
The map database contains navigation data such as roads, addresses and points of interest.
Firmware is the software controlling the MMI unit itself.
Installing maps does not automatically update the firmware.
Likewise, installing firmware does not automatically install new navigation maps.
BNav_EU_K0260_1_D1 Firmware
For compatible European MMI 3G Basic systems, the firmware available on MMIUpdates.com is:
BNav_EU_K0260_1_D1
Product number:
8R0906961DP
Firmware product:
Do not choose firmware only because K0260_1_D1 has a higher number than your current version.
The complete current software train should be checked first.
A firmware update is a separate operation from the 5.36.1 navigation update.
Do I Need K0260_1_D1 Before Installing 5.36.1 Maps?
That depends on the current software installed in the vehicle.
Do not assume that every car requires a firmware update before maps.
First check:
- the complete current BNav firmware version,
- the target map package,
- the region of the MMI,
- and the instructions supplied with the update.
If your software is very old or the target package requires a newer firmware level, updating the firmware first may be necessary.
If you are unsure, enter the complete version here:
Maps Only or Complete Bundle?
There are two main ways to update a European MMI 3G Basic system.
Option 1 – 5.36.1 Maps Only
Choose the maps-only package when the firmware in your MMI is already suitable and you only need the European navigation database.
Maps:
The package is intended for compatible BNav systems and includes the required map activation solution supplied with the product.
Option 2 – Firmware + Maps Bundle
If your MMI also requires a firmware update, the complete package includes:
- BNav_EU_K0260_1_D1 firmware,
- Europe 5.36.1 maps,
- map activation,
- Green Menu activator,
- and installation instructions.
Bundle:
The bundle can be useful for systems running significantly older firmware, but compatibility should still be checked before installation.
Navigation Map Installation and Activation Are Separate
Installing the 5.36.1 navigation database and activating the maps should be treated as separate stages.
It is possible for the MMI to contain the new map database while navigation is not yet authorized correctly.
For this reason, always follow the activation instructions included with the exact package.
Do not use an activator intended for MMI 3G High, 3G Plus or another infotainment platform.
The activation method must match MMI 3G Basic.
How to Install MMI 3G Basic 5.36.1 Maps
We maintain a separate detailed installation guide for this procedure:
The general process is:
- Confirm that the software version begins with BNav_.
- Verify that the vehicle uses the European MMI configuration.
- Check whether the current firmware is suitable.
- Download and extract the navigation package.
- Prepare the required SD card.
- Copy the update contents to the correct level of the SD card.
- Allow the MMI to boot fully.
- Start the navigation update according to the supplied procedure.
- Do not interrupt power or remove the update media during installation.
- Complete map activation if required by the package.
- Restart the system and verify the new navigation database.
For the complete step-by-step procedure, use the dedicated tutorial rather than instructions written for MMI 3G High or 3G Plus.
SD Card Preparation
A correctly prepared SD card is essential.
Before copying the map package:
- extract the complete archive first,
- make sure all archive parts have downloaded correctly,
- use a reliable SD card with enough capacity,
- follow the filesystem specified in the package instructions,
- and copy the actual update contents to the required level of the card.
One common mistake is creating an additional parent folder.
For example, the MMI may expect the update files directly at the root of the SD card but instead receives:
SD CARD
└── downloaded-folder
└── update files
If the system cannot detect the update, check the directory structure before changing any engineering menu settings.
Keep the Vehicle Power Supply Stable
Navigation and firmware updates can take time.
The electrical system should remain stable throughout the installation.
Do not:
- disconnect the battery,
- remove the SD card during the update,
- restart the MMI manually,
- or interrupt the installation once data is being written.
For longer procedures, suitable external battery support is recommended.
Which Audi Models Can Have MMI 3G Basic?
MMI 3G Basic can be found in various Audi vehicles, including selected versions of:
Audi A4
Audi A5
Audi A6
Audi Q5
Audi Q7
and related S or RS models depending on equipment and market.
However, the vehicle model and year are not enough to determine compatibility.
For example, two Audi A5 vehicles from a similar production period can use different infotainment systems.
Always check the software prefix.
BNav_ is much more useful for update identification than simply knowing the car is an “Audi A5 2013”.
MMI 3G Basic vs MMI 3G High
MMI 3G Basic and MMI 3G High are different systems.
MMI 3G Basic normally uses:
BNav_
MMI 3G High normally uses:
HNav_
They do not use the same firmware packages or the same navigation databases.
The 5.36.1 / 4G0060884AN package described here is for MMI 3G Basic.
If your version begins with HNav_, use the dedicated MMI 3G High / Plus map information instead.
MMI 3G Basic vs MMI 3G Plus
MMI 3G Plus commonly uses software prefixes such as:
HN+_
HN+R_
It is not compatible with the MMI 3G Basic 5.36.1 map package.
MMI 3G Plus uses a different navigation database family.
Do not install an HN+ or HN+R package on a BNav unit and do not use a BNav package on MMI 3G Plus.
Can I Install 6.36.0 Maps on MMI 3G Basic?
No.
The 6.36.0 European map release available for compatible MMI 3G High and MMI 3G Plus systems belongs to a different navigation platform.
MMI 3G Basic uses its own BNav-compatible navigation database.
For the European BNav system covered here, use 5.36.1 / 4G0060884AN.
What If My Audi Has Maps Older Than 5.36.1?
Older maps do not automatically mean that anything is wrong with the MMI.
First check the software version.
If the unit is a compatible European BNav system, 5.36.1 is the current target navigation release available on MMIUpdates.com.
If the firmware is also old, check whether it needs to be updated before the navigation installation.
Do not install random intermediate firmware or map packages simply because their version numbers appear between your current version and 5.36.1.
What If the MMI Does Not Detect the Map Update?
If the update does not appear, check:
- Is the system really BNav?
- Is the package for Europe?
- Was the archive extracted correctly?
- Are all required files present?
- Are the files at the correct level of the SD card?
- Is the SD card readable by the MMI?
- Does the package support your current firmware?
- Are you following the MMI 3G Basic procedure rather than a 3G High/Plus guide?
Do not change hidden menu parameters randomly to force the update to appear.
Maps Installed but Navigation Does Not Work
If Version Information shows the new database but navigation is unavailable or the maps stop working, check the activation stage.
Map files and navigation authorization are separate.
Confirm that:
- the correct BNav activation method was used,
- activation completed successfully,
- the map package matches the system and region,
- and the MMI was allowed to restart fully.
If the vehicle has previously been converted between regions or modified, additional diagnosis may be required.
Can Apple CarPlay or Android Auto Be Added to MMI 3G Basic?
Yes, compatible MMI 3G systems can use an external CarPlay / Android Auto interface.
This is a hardware integration and is completely separate from the 5.36.1 navigation update.
Installing 5.36.1 maps or K0260_1_D1 firmware does not by itself add Apple CarPlay or Android Auto.
CarPlay / Android Auto interface:
What to Check After Installing 5.36.1
Once the installation and activation are complete, check:
- navigation database version,
- GPS position,
- map display,
- route calculation,
- destination search,
- voice guidance,
- navigation licence status,
- and normal MMI operation.
If firmware was also updated, check the displayed firmware version separately.
The map version and firmware version should never be treated as the same value.
Frequently Asked Questions
What is the latest Audi MMI 3G Basic Europe map update?
The latest European MMI 3G Basic navigation package currently available on MMIUpdates.com is version 5.36.1.
What is the product number for MMI 3G Basic 5.36.1?
The product number is 4G0060884AN.
What MMI system uses 4G0060884AN?
It is intended for compatible European Audi MMI 3G Basic systems using the BNav software family.
How do I know if my Audi has MMI 3G Basic?
Check Version Information. A software train beginning with BNav_ identifies the MMI 3G Basic family.
Does 5.36.1 work with BNav_EU?
It is the European map package intended for compatible BNav systems. Always check the complete firmware version before installation.
Does 5.36.1 work with HNav?
No. HNav identifies MMI 3G High, which uses a different navigation package.
Does 5.36.1 work with HN+ or HN+R?
No. HN+ and HN+R identify MMI 3G Plus systems.
Can I install 6.36.0 maps on MMI 3G Basic?
No. 6.36.0 belongs to the MMI 3G High / 3G Plus map family, not BNav.
What is BNav_EU_K0260_1_D1?
BNav_EU_K0260_1_D1 is a European MMI 3G Basic firmware release. Its product number is 8R0906961DP.
Is K0260_1_D1 the same as map version 5.36.1?
No. K0260_1_D1 is firmware, while 5.36.1 is a navigation map database.
Do I need K0260_1_D1 before installing 5.36.1?
Not automatically in every case. Check the complete current software version and the requirements of the map package first.
Do 5.36.1 maps require activation?
The maps and navigation authorization are separate. Follow the activation procedure included with the compatible package.
Is activation included with the MMIUpdates 5.36.1 package?
The maps product currently offered on MMIUpdates.com includes the required activation solution for the supported BNav configuration.
What is included in the complete MMI 3G Basic bundle?
The bundle includes BNav_EU_K0260_1_D1 firmware, 5.36.1 Europe maps, map activation and a Green Menu activator.
Can I update directly from older maps such as 5.30.2 or 5.35.2?
Map compatibility should be checked against the system and firmware. There is generally no benefit in installing an obsolete intermediate map release when the unit is already compatible with 5.36.1.
How do I install MMI 3G Basic 5.36.1 maps?
Use the dedicated installation guide:
Why does my MMI not detect the SD card?
Common causes include incorrect folder structure, incomplete extraction, incompatible SD media, the wrong MMI platform or an incompatible package.
Why are 5.36.1 maps installed but navigation is unavailable?
Check the map activation stage, regional compatibility and whether the correct BNav activation method was used.
Can the 5.36.1 update add Apple CarPlay?
No. Navigation maps do not activate Apple CarPlay. CarPlay requires a separate compatible solution.
How can I check which update is correct for my Audi?
Enter the complete MMI software version here:
