Audi MMI 3G High and MMI 3G Plus are still widely used in Audi A4, A5, A6, A7, A8, Q5, Q7 and several other models. For European systems, one of the most important navigation releases is map database version 6.36.0 with Audi part number 8R0051884KL.
This page is specifically about the European 6.36.0 navigation map release for compatible MMI 3G High and MMI 3G Plus systems.
It is not a firmware update.
Quick facts:
Map version: 6.36.0
Audi part number: 8R0051884KL
Region: Europe / ECE
MMI systems: MMI 3G High and MMI 3G Plus
Update type: Navigation maps
Firmware: Separate from the map package
Activation: May be required depending on the system and package
What Is Audi Map Version 6.36.0?
6.36.0 is a European navigation database release for compatible Audi MMI 3G High and MMI 3G Plus systems.
The corresponding Audi map part number is:
8R0051884KL
This is a navigation map package, not an MMI firmware version.
That distinction is important because software versions such as:
HNav_EU_K0257_6_D1
HN+_EU_AU3G_K0942
HN+R_EU_AU_K0942_4
HN+R_EU_AU_P1001
refer to MMI firmware, while:
6.36.0 / 8R0051884KL
refers to the European navigation database.
Updating the maps does not automatically update the MMI firmware.
Which Audi MMI Systems Support 6.36.0?
The 6.36.0 European map release is intended for compatible Audi MMI 3G High and MMI 3G Plus systems.
The easiest way to distinguish them is by the software version shown in the MMI.
MMI 3G High
MMI 3G High normally uses software beginning with:
HNav_
European units normally use:
HNav_EU_
Example:
HNav_EU_K0257_6_D1
MMI 3G Plus
MMI 3G Plus normally uses software beginning with:
HN+_
or:
HN+R_
European examples include:
HN+EU_AU3G
HN+R_EU_AU_
Example versions include:
HN+_EU_AU3G_K0942
HN+R_EU_AU_K0942_4
HN+R_EU_AU_P1001
6.36.0 Is Not for MMI 3G Basic
Do not confuse MMI 3G High or Plus with MMI 3G Basic.
MMI 3G Basic normally uses:
BNav_
European Basic units use:
BNav_EU_
MMI 3G Basic has a completely different navigation map family.
For example:
5.36.1 / 4G0060884AN
is a European map release for compatible MMI 3G Basic systems.
If your software version begins with BNav_, use the MMI 3G Basic map information instead:
How to Check Which MMI System You Have
Before buying or installing any map package, check the complete MMI software version.
Do not identify the system only by:
vehicle model
production year
screen size
control panel
navigation appearance
Similar Audi models can use different MMI generations.
Use our complete identification guide:
You can also use:
Enter the full software version exactly as displayed by the MMI.
For example:
HNav_EU_P0022_D1
or:
HN+R_EU_AU_P0770
not simply:
P0022
or:
P0770
Audi MMI 3G High 6.36.0 Maps
For MMI 3G High, the software version should normally begin with:
HNav_
For a European system:
HNav_EU_
The 6.36.0 / 8R0051884KL navigation package is available specifically for compatible MMI 3G High systems.
Product:
If your current firmware is very old, check whether a firmware update is recommended before installing the newer map database.
A commonly used European MMI 3G High firmware branch is:
HNav_EU_K0257_6_D1
Firmware information:
Do not assume that every HNav unit must be updated to the same firmware before installing maps. The correct path depends on the current software version.
Audi MMI 3G Plus 6.36.0 Maps
MMI 3G Plus systems normally use:
HN+_
or:
HN+R_
The European 6.36.0 map package is also available for compatible MMI 3G Plus systems.
Product:
MMI 3G Plus contains several different firmware branches, so do not select firmware only by the fact that the system supports the same 6.36.0 map database.
Examples include:
HN+_EU_AU3G_K0942
HN+R_EU_AU_K0942_4
HN+R_EU_AU_P1001
These are firmware trains.
6.36.0 is the navigation map version.
Previous European MMI 3G High / Plus Map Releases
The European MMI 3G High and Plus map database was updated through several releases before 6.36.0.
Historical versions include:
6.29.1 – earlier Europe map release
6.30.1 – 8R0060884GS
6.31.1 – earlier Europe map release
6.33.1 – 8R0051884JD
6.34.1 – 8R0051884JN
6.35.1 – 8R0051884KB
6.36.0 – 8R0051884KL
For users still running one of these older map databases, there is normally little reason to install every intermediate map release one after another.
Map updates are not the same as firmware update chains.
If your MMI is compatible with 6.36.0, the important question is whether your current firmware and navigation licensing support the target package.
Older release pages for 6.29.1, 6.30.1, 6.31.1, 6.33.1, 6.34.1 and 6.35.1 have been consolidated into this page so that users can find the current information in one place.
Do I Need to Install 6.35.1 Before 6.36.0?
Normally, navigation map releases do not need to be installed one by one simply because an older map database is present.
For example, having:
6.30.1
does not automatically mean you must install:
6.31.1
6.33.1
6.34.1
6.35.1
before moving to 6.36.0.
The important factors are:
your MMI generation,
the complete firmware version,
the map package,
and the required activation method.
Always follow the instructions for the exact package.
Do I Need to Update the Firmware First?
Sometimes, but not in every case.
Firmware and maps are separate.
For MMI 3G High, you may encounter firmware such as:
HNav_EU_K0257_6_D1
For MMI 3G Plus:
HN+_EU_AU3G_K0942
or compatible HN+R firmware branches.
If the existing firmware is significantly older, the navigation update may require or benefit from a firmware update first.
However, there is no universal rule saying that every Audi must be updated to the highest firmware number before installing 6.36.0.
Check the current software version before deciding.
Firmware compatibility guide:
Firmware vs Maps – Example
A useful way to understand the difference:
HNav_EU_K0257_6_D1
= MMI 3G High firmware
HN+_EU_AU3G_K0942
= MMI 3G Plus firmware
HN+R_EU_AU_P1001
= MMI 3G Plus HN+R firmware
6.36.0 / 8R0051884KL
= European navigation maps
The navigation version and firmware version describe different parts of the MMI system.
Is Map Activation Required?
Depending on the MMI system and the update package, navigation activation may be required after installing the map database.
A successful copy of the 6.36.0 files to the MMI does not necessarily mean the navigation licence is already valid.
Activation is separate from:
firmware installation,
map file installation,
and Green Menu activation.
Follow the activation instructions supplied with the package you are using.
Do not use an activation method intended for:
MMI 3G Basic,
MIB1,
MIB2,
MHS2,
MH2p
on an MMI 3G High or Plus system.
How to Install Audi MMI 3G 6.36.0 Maps
The general workflow is:
- Identify the exact MMI system.
- Check the current firmware version.
- Confirm compatibility with the 6.36.0 package.
- Download and fully extract the update files.
- Prepare the SD card as required by the package.
- Copy the update files to the correct level of the SD card.
- Start the navigation map update using the correct MMI procedure.
- Wait until the update completes.
- Complete map activation if required.
- Restart the MMI and verify the new navigation database version.
For the complete step-by-step MMI 3G High / Plus map installation guide:
Preparing the SD Card
Use a reliable SD card and follow the package-specific instructions.
A frequent cause of update problems is incorrect extraction.
For example, users sometimes copy:
SD CARD
└── 6.36.0
└── update files
when the package expects the actual update files directly in the root directory.
Another common problem is extracting only one archive part incorrectly.
If the download consists of multipart archives, all parts must be available during extraction.
Do not copy compressed archives directly to the SD card unless the supplied instructions explicitly say to do so.
If the MMI cannot detect the update:
Keep the Electrical System Stable
Navigation map installation can take a significant amount of time.
Do not allow the vehicle voltage to drop during the process.
For long MMI update procedures, a suitable external battery support or charger is preferable.
Do not:
disconnect the battery,
remove the SD card during installation,
force-restart the MMI,
or switch off the system while data is being written.
An interrupted update can lead to incomplete navigation data or other errors.
What Countries Are Included?
6.36.0 / 8R0051884KL is an ECE / European navigation release.
It is not the correct map package for:
USA
Canada
Mexico
Australia
New Zealand
Middle East
South Africa
or other ROW regions.
If your MMI currently uses a North American or Rest of World configuration, do not install a European map package simply because the car is now located in Europe.
A region conversion is a separate procedure.
Can I Convert a US Audi to Europe by Installing 6.36.0?
No.
Installing European navigation maps alone is not a complete region conversion.
A proper MMI region conversion can involve:
firmware region,
navigation configuration,
radio settings,
languages,
licensing,
and other software parameters.
If your current firmware begins with a US branch, check the appropriate conversion procedure instead of treating 6.36.0 as a normal map update.
Does 6.36.0 Add Apple CarPlay or Android Auto?
No.
6.36.0 is a navigation map database.
It does not add:
Apple CarPlay
Android Auto
Bluetooth streaming
new firmware functions
MIB2 features
MMI 3G High and Plus do not become MIB2 systems by installing newer maps.
For Apple CarPlay or Android Auto on older MMI 3G systems, a dedicated retrofit interface is normally required.
Example:
Is 6.36.0 the Same as MIB2 Maps?
No.
MMI 3G and MIB2 use completely different map families.
6.36.0 / 8R0051884KL is for compatible MMI 3G High and Plus systems.
MIB2 systems such as:
MHI2
MHI2Q
use other navigation packages.
For MIB2 map compatibility:
What If My MMI Shows BNav?
Then this is the wrong map package.
BNav means MMI 3G Basic.
For BNav, use the dedicated MMI 3G Basic update information:
and:
What If My MMI Shows HNav?
HNav normally identifies MMI 3G High.
For European units, you may see versions such as:
HNav_EU_P0022_D1
HNav_EU_P0029_D1
HNav_EU_K0257_6_D1
If your system is HNav_EU_, this 6.36.0 page is relevant, but firmware compatibility should still be checked before installation.
What If My MMI Shows HN+?
HN+ normally identifies MMI 3G Plus.
Examples include:
HN+_EU_AU3G_P0814
HN+_EU_AU3G_K0942
If your system uses the European HN+ branch, select the MMI 3G Plus version of the map package.
What If My MMI Shows HN+R?
HN+R is another MMI 3G Plus branch.
Examples include:
HN+R_EU_AU_P0770
HN+R_EU_AU_K0942_4
HN+R_EU_AU_P1001
These systems can use compatible MMI 3G Plus navigation updates, but the firmware branch and activation method must still be checked.
How to Confirm That 6.36.0 Was Installed
After installation and activation, open the MMI version information screen.
Check the navigation database version.
You should confirm that the map database has changed to the expected 6.36.0 release.
Do not rely only on:
new road appearance,
different route suggestions,
or a successful installation message.
Always verify the displayed navigation database information.
Common Problems After the Map Update
The update does not appear
Usually caused by:
incorrect file structure,
bad archive extraction,
incorrect SD card preparation,
or an incompatible package.
The MMI says the medium is unavailable
Check the SD card and package-specific formatting requirements.
Maps install but navigation does not work
Map activation or licensing may still be required.
The update stops with an error
Do not repeatedly force the update without checking the exact error message and software version.
I installed 6.36.0 but the firmware number did not change
That is normal.
6.36.0 updates the navigation database, not the MMI firmware.
MMI 3G High / Plus Map Update Products
MMI 3G High:
MMI 3G Plus:
Complete Firmware + Map Packages
If your Audi also requires a firmware update, a complete bundle may be more suitable than buying the map package alone.
The correct bundle depends on the exact software branch.
Do not select a package simply because it contains 6.36.0 maps.
First identify whether your system is:
HNav
HN+
or HN+R
and then verify the supported firmware path.
Frequently Asked Questions
What is 8R0051884KL?
8R0051884KL is the Audi part number associated with the 6.36.0 European navigation map release for compatible MMI 3G High and MMI 3G Plus systems.
What is Audi MMI map version 6.36.0?
It is a European navigation database release for compatible Audi MMI 3G High and Plus systems.
Is 6.36.0 a firmware update?
No. It is a navigation map update.
Does 6.36.0 work with MMI 3G Basic?
No. MMI 3G Basic / BNav uses a different map family.
Does 6.36.0 work with MMI 3G High?
Yes, for compatible European HNav systems.
Does 6.36.0 work with MMI 3G Plus?
Yes, for compatible European HN+ and HN+R systems.
How do I know if I have HNav?
Check the software version. MMI 3G High normally begins with HNav_.
How do I know if I have HN+ or HN+R?
Check Version Information in the MMI. MMI 3G Plus software normally begins with HN+_ or HN+R_.
Is 8R0051884KL for Europe?
Yes. This release is intended for the European / ECE region.
Can I install 8R0051884KL on a US system?
Not as a normal map update. A region conversion is a separate process.
Do I need 6.35.1 before installing 6.36.0?
Normally you do not need to install every previous map release sequentially. Compatibility with the current MMI firmware and target package is more important.
What was before 6.36.0?
Earlier European releases included 6.29.1, 6.30.1, 6.31.1, 6.33.1, 6.34.1 and 6.35.1.
Is 8R0051884KB older than 8R0051884KL?
Yes. 8R0051884KB corresponds to the earlier 6.35.1 release, while 8R0051884KL corresponds to 6.36.0.
Is 8R0051884JN older than 8R0051884KL?
Yes. 8R0051884JN corresponds to the earlier 6.34.1 release.
Is 8R0051884JD older than 8R0051884KL?
Yes. 8R0051884JD corresponds to the earlier 6.33.1 release.
Do I need to update MMI firmware before installing 6.36.0?
Possibly, depending on your current firmware. Check the complete software train first.
Does installing 6.36.0 activate the maps automatically?
Not necessarily. Map activation may be a separate step depending on the package and system.
Does 6.36.0 add Apple CarPlay?
No.
Can 6.36.0 convert MMI 3G to MIB2?
No. MMI 3G and MIB2 use different hardware platforms.
Where can I find the full installation guide?
Use:
Where can I check which update fits my Audi?
Use:
